The Junos - Associate (JNCIA-Junos) 2025 Exam (JN0-105)

Transit traffic that traverses the forwarding plane of a Layer 3 router includes both unicast and multicast traffic types. Unicast traffic is directed from a single source to a single destination, while multicast traffic is sent from one source to multiple destinations that are part of a multicast group. These types of traffic are efficiently routed through the network by leveraging the router ' s forwarding plane capabilities. Exception traffic, which requires special handling by the control plane, and broadcast traffic, which is typically limited to a single broadcast domain and not usually forwarded by Layer 3 routers, are not considered standard types of transit traffic for the forwarding plane of a router.

In Junos OS routing policy evaluation, " next policy " (A) and " next term " (C) are common actions that affect the flow of policy evaluation. " Next policy " directs the evaluation to the next policy in the sequence, whereas " next term " moves the evaluation to the next term within the current policy, allowing for granular control over routing decisions.

UDP (User Datagram Protocol) is known for being connectionless (D) and providing best-effort delivery without the reliability mechanisms present in TCP (C). This means that UDP does not establish a connection before sending data and does not guarantee delivery, order, or error checking, making it faster but less reliable than TCP.

Junos OS supports several external authentication methods for administrative access, with TACACS+ (Terminal Access Controller Access-Control System Plus) and RADIUS (Remote Authentication Dial-In User Service) being among the most commonly used. Both TACACS+ and RADIUS are protocols that allow network devices to communicate with a central authentication server, enabling centralized control over user authentication and authorization. This centralization simplifies the management of user credentials and access policies, especially in larger networks with multiple devices.

In the scenario where the system authentication order is set to " tacplus radius password, " the correct statement is (B). If the TACACS+ and RADIUS servers are unreachable or fail to respond, the system will fall back to using password authentication. This ensures that users can still authenticate using locally stored passwords if external authentication servers are unavailable.

The request system configuration rescue save command in Junos OS saves the most recently committed configuration as the rescue configuration. This rescue configuration can be used to recover the device if future configurations cause issues. It ensures there is a stable, known-good configuration to fall back on, which is crucial in network management and troubleshooting.

The clear log ospf-trace command on a Juniper Networks router is used specifically to manage the contents of the log file named ospf-trace . Executing this command clears or deletes the existing data within the ospf-trace log file but does not stop the logging process. The router continues to log new OSPF-related events and data into this file after the command is executed. This functionality is crucial for troubleshooting and monitoring the OSPF (Open Shortest Path First) protocol ' s operation by allowing network administrators to remove old or irrelevant log data while continuously capturing new events without interruption.

The show route table inet6.0 command displays all IPv6 routes in the default routing instance. In Junos OS, the routing table for IPv6 addresses is referred to as inet6.0 , whereas inet.0 is used for IPv4 unicast routes. The other options do not correspond to the correct IPv6 routing table.

In Junos OS, the dedicated out-of-band management interface is typically named fxp0 . This interface is used exclusively for management traffic and is physically separated from the data traffic interfaces. It allows administrators to perform management tasks even when the device is experiencing issues that affect the forwarding plane.

From the JNCIA-Junos Study Guide and Junos OS Documentation :

“The fxp0 interface is a dedicated management interface that provides out-of-band management access. It is commonly found on Juniper routers, switches, and security platforms. You assign IP addresses to this interface as you would any other, and it is often used to connect to a management network or to allow SSH, Telnet, or SNMP access.”

— Junos OS Fundamentals, Chapter: Interfaces

— Junos OS Documentation: Management Interfaces Overview

— JNCIA-Junos Exam Objective: Interface Types